SCORPION MB36
350 A gas-cooled MIG/MAG torch
Power to weld all shift long.
- 350A
- Current on CO₂
- 60%
- Töötsükkel
- 4.5m
- Max length
01 / Ülevaade
Power to weld all shift long.
350 A on CO₂ · 300 A on mixed gas. Ergonomic handle.
Soft-grip rubber and a quick-response trigger for comfort over long hours. Protective spring at the cable joint to withstand repeated bending.
Mudel
SCORPION MB36
Tootekood
HPT-M36-453
Tooteseeria
Põletid ja tarvikud
Leht / Red.
01 / A
Andmed HELIOSe ametlikult andmelehelt. Pideva täiustamise tõttu võivad muutuda.
02 / Tehniline leht
Tehniline leht
60%
Töötsükkel
Elektrilised andmed
3- Current on CO₂
- 350 A
- Current on mixed gas
- 300 A
- Töötsükkel
- 60 %
Füüsilised andmed ja keskkond
2- Jahutus
- Gaas
- Pikkus
- 4.5 m
Spare parts
Exploded view & spare parts
Position number in the drawing, HELIOS part number and description of each part.
123455-16881011121314
15161718| Pos. | Part no. | Description |
|---|---|---|
| 1 | HPM-M36-N16 | Gas nozzle, conical ø16 mm |
| 1 | HPM-M36-N12 | Gas nozzle, conical ø12 mm |
| 1 | HPM-M36-N19 | Gas nozzle, cylindrical ø19 mm |
| 2 | HPM-M25-T08 | Contact tip M6×28 ø0.8 mm E-Cu |
| 2 | HPM-M25-T09 | Contact tip M6×28 ø0.9 mm E-Cu |
| 2 | HPM-M25-T10 | Contact tip M6×28 ø1.0 mm E-Cu |
| 2 | HPM-M25-T12 | Contact tip M6×28 ø1.2 mm E-Cu |
| 2 | HPM-M25-A08 | Contact tip M6×28 ø0.8 mm E-Cu, aluminium |
| 2 | HPM-M25-A10 | Contact tip M6×28 ø1.0 mm E-Cu, aluminium |
| 2 | HPM-M25-A12 | Contact tip M6×28 ø1.2 mm E-Cu, aluminium |
| 2 | HPM-M25-C08 | Contact tip M6×28 ø0.8 mm CuCrZr |
| 2 | HPM-M25-C10 | Contact tip M6×28 ø1.0 mm CuCrZr |
| 2 | HPM-M25-C12 | Contact tip M6×28 ø1.2 mm CuCrZr |
| 2 | HPM-M36-T08 | Contact tip M8×30 ø0.8 mm E-Cu |
| 2 | HPM-M36-T10 | Contact tip M8×30 ø1.0 mm E-Cu |
| 2 | HPM-M36-T12 | Contact tip M8×30 ø1.2 mm E-Cu |
| 2 | HPM-M36-T16 | Contact tip M8×30 ø1.6 mm E-Cu |
| 2 | HPM-M36-A08 | Contact tip M8×30 ø0.8 mm E-Cu, aluminium |
| 2 | HPM-M36-A10 | Contact tip M8×30 ø1.0 mm E-Cu, aluminium |
| 2 | HPM-M36-A12 | Contact tip M8×30 ø1.2 mm E-Cu, aluminium |
| 2 | HPM-M36-A16 | Contact tip M8×30 ø1.6 mm E-Cu, aluminium |
| 2 | HPM-M36-C08 | Contact tip M8×30 ø0.8 mm CuCrZr |
| 2 | HPM-M36-C10 | Contact tip M8×30 ø1.0 mm CuCrZr |
| 2 | HPM-M36-C12 | Contact tip M8×30 ø1.2 mm CuCrZr |
| 2 | HPM-M36-C16 | Contact tip M8×30 ø1.6 mm CuCrZr |
| 3 | HPM-M25-H01 | Contact tip holder M6×28 mm |
| 3 | HPM-M36-H01 | Contact tip holder M8×28 mm |
| 3 | HPM-M36-H02 | Contact tip holder M8×32 mm |
| 4 | HPM-M36-D01 | White ceramic gas diffuser |
| 5 | HPM-M36-K01 | Swan neck |
| 5-1 | HPM-M36-K02 | Swan-neck plastic body |
| 6 | HPM-M36-G01 | MIG front grip handle |
| 7 | HPM-M36-S01 | Trigger kit (switch, board and spring) |
| 8 | HPM-M36-J01 | Ball-joint cable support |
| 9-1 | HPM-M36-G03 | Trigger lever |
| 10 | HPM-M36-W01 | Coaxial cable |
| 11 | HPM-M36-R02 | Cable-support spring (boot) |
| 12 | HPM-M36-G04 | Rear handle |
| 13 | HPM-M36-P01 | Torch lock nut |
| 14 | HPM-M36-E01 | Euro central adapter body + spring pins |
| 15 | HPM-M36-U01 | MIG torch spanner |
| 16 | HPM-M36-L18 | Insulated steel liner, yellow, 3 m |
| 16 | HPM-M36-L17 | Insulated steel liner, yellow, 4 m |
| 16 | HPM-M36-L16 | Insulated steel liner, yellow, 5 m |
| 17 | HPM-M36-L31 | Yellow Teflon liner + brass liner |
| 18 | HPM-M36-L21 | Yellow Teflon liner, 3.5 m |
| 18 | HPM-M36-L22 | Yellow Teflon liner, 4.5 m |
| 18 | HPM-M36-L23 | Yellow Teflon liner, 5.5 m |
| 19 | HPT-M36-303 | MIG torch MB36, 3 m, Euro connector |
| 20 | HPT-M36-403 | MIG torch MB36, 4 m, Euro connector |
| 20 | HPT-M36-453 | MIG torch MB36, 4.5 m, Euro connector |
| 21 | HPT-M36-503 | MIG torch MB36, 5 m, Euro connector |
PDF-tooteleht
Võta kogu tooteleht kaasa
PDF-fail selle seadme foto, kõigi andmete ja QR-koodiga, HELIOSe kujunduses ja oma dokumendi-ID-ga, et teaksid alati, milline versioon sul käes on.
03 / Allalaadimised
Dokumentatsioon ja failid
04 / Seotud tooted
