SCORPION MB25
250 A gas-cooled MIG/MAG torch
Light and precise for everyday welding.
- 250A
- Current on CO₂
- 60%
- Cykl pracy
- 5m
- Max length
01 / Opis
Light and precise for everyday welding.
250 A on CO₂ · 220 A on mixed gas. Ergonomic handle.
Soft-grip rubber and a quick-response trigger for comfort over long hours. Protective spring at the cable joint to withstand repeated bending.
Model
SCORPION MB25
Numer katalogowy
HPT-M25-325 · HPT-M25-425
Rodzina
Uchwyty i akcesoria
Arkusz / Rew.
01 / A
Dane z oficjalnej karty katalogowej HELIOS. Mogą ulec zmianie w ramach ciągłego doskonalenia.
02 / Karta techniczna
Karta techniczna
60%
Cykl pracy
Parametry elektryczne
3- Current on CO₂
- 250 A
- Current on mixed gas
- 220 A
- Cykl pracy
- 60 %
Proces i sterowanie
1- Średnica drutu
- 0.8 – 1.2 mm
Dane fizyczne i otoczenie
2- Chłodzenie
- Gaz
- Długość
- 3 · 4 · 5 m
Spare parts
Exploded view & spare parts
Position number in the drawing, HELIOS part number and description of each part.
123-1344-155-169-1881011121314
15161718| Pos. | Part no. | Description |
|---|---|---|
| 1 | HPM-M25-N01 | Gas nozzle, conical ø15 mm |
| 1 | HPM-M25-N02 | Gas nozzle, conical ø11.5 mm |
| 1 | HPM-M25-N03 | Gas nozzle, cylindrical ø18 mm |
| 2 | HPM-M25-T08 | Contact tip M6×28 ø0.8 mm E-Cu |
| 2 | HPM-M25-T10 | Contact tip M6×28 ø1.0 mm E-Cu |
| 2 | HPM-M25-T12 | Contact tip M6×28 ø1.2 mm E-Cu |
| 2 | HPM-M25-A08 | Contact tip M6×28 ø0.8 mm E-Cu, aluminium |
| 2 | HPM-M25-A10 | Contact tip M6×28 ø1.0 mm E-Cu, aluminium |
| 2 | HPM-M25-A12 | Contact tip M6×28 ø1.2 mm E-Cu, aluminium |
| 2 | HPM-M25-C08 | Contact tip M6×28 ø0.8 mm CuCrZr |
| 2 | HPM-M25-C10 | Contact tip M6×28 ø1.0 mm CuCrZr |
| 2 | HPM-M25-C12 | Contact tip M6×28 ø1.2 mm CuCrZr |
| 3 | HPM-M25-H01 | Contact tip holder M6/M8 35 mm, brass |
| 3-1 | HPM-M25-H03 | Contact tip holder M6/M8 35 mm, copper |
| 4 | HPM-M25-H04 | Gas nozzle holder |
| 4-1 | HPM-M25-R01 | Nozzle spring |
| 5 | HPM-M25-K01 | Swan neck |
| 5-1 | HPM-M36-K02 | Swan-neck plastic body |
| 6 | HPM-M36-G01 | MIG front grip handle |
| 7 | HPM-M36-S01 | Trigger kit (switch, board and spring) |
| 8 | HPM-M25-J01 | Ball-joint cable support |
| 9-1 | HPM-M36-G03 | Trigger lever |
| 10 | HPM-M25-W01 | Coaxial cable |
| 11 | HPM-M36-R02 | Cable-support spring (boot) |
| 12 | HPM-M36-G04 | Rear handle |
| 13 | HPM-M36-P01 | Torch lock nut |
| 14 | HPM-M36-E01 | Euro central adapter body + spring pins |
| 15 | HPM-M36-U01 | MIG torch spanner |
| 16 | HPM-M25-L14 | Insulated steel liner, red, 3 m |
| 16 | HPM-M25-L13 | Insulated steel liner, red, 4 m |
| 16 | HPM-M25-L12 | Insulated steel liner, red, 5 m |
| 17 | HPM-M25-L31 | Red Teflon liner + brass liner |
| 18 | HPM-M25-L21 | Red Teflon liner, 3.5 m |
| 18 | HPM-M25-L22 | Red Teflon liner, 4.5 m |
| 18 | HPM-M25-L23 | Red Teflon liner, 5.5 m |
| 19 | HPT-M25-325 | MIG torch MB25, 3 m, Euro connector |
| 20 | HPT-M25-425 | MIG torch MB25, 4 m, Euro connector |
| 21 | HPT-M25-525 | MIG torch MB25, 5 m, Euro connector |
Karta w PDF
Zabierz ze sobą pełną kartę katalogową
Plik PDF ze zdjęciem, wszystkimi danymi i kodem QR tego urządzenia, w oprawie graficznej HELIOS i z własnym identyfikatorem, dzięki któremu zawsze wiesz, którą wersję masz w ręku.
03 / Do pobrania
Dokumentacja i pliki do pobrania
04 / Powiązane
