SCORPION SPRAYMASTER 250
250 A gas-cooled MIG/MAG torch
80 % duty cycle for continuous production.
- 250A
- Current on CO₂
- 80%
- Intermittens
- 5m
- Max length
01 / Översikt
80 % duty cycle for continuous production.
250 A on CO₂ · 200 A on mixed gas. 45° neck and copper nozzle.
Easy joint access and 9.5 to 15.9 mm nozzles for every application. Four connector types and 3, 4 or 5 m cables to suit almost any machine.
Modell
SCORPION SPRAYMASTER 250
Artikelnummer
HPT-S25-301 … 504
Familj
Svetspistoler och tillbehör
Blad / Rev.
01 / A
Uppgifter från HELIOS officiella datablad. Med reservation för löpande förbättringar.
02 / Tekniskt datablad
Tekniskt datablad
80%
Intermittens
Elektriskt
3- Current on CO₂
- 250 A
- Current on mixed gas
- 200 A
- Intermittens
- 80 %
Process och styrning
1- Tråddiameter
- 0.8 – 1.2 mm
Fysiskt och miljö
2- Kylning
- Gas
- Längd
- 3 · 4 · 5 m
Övriga data
1- Connectors
- Euro · Miller · Tweco · Lincoln
Spare parts
Exploded view & spare parts
Position number in the drawing, HELIOS part number and description of each part.
1234578910-110-210-310-410-51515151112131414-1| Pos. | Part no. | Description |
|---|---|---|
| 1 | HPM-S25-N09 | Nozzle 3/8" (9.5 mm) |
| 1 | HPM-S25-N12 | Nozzle 1/2" (12.7 mm) |
| 1 | HPM-S25-N13 | Nozzle 1/2" (12.7 mm), flush |
| 1 | HPM-S25-N16 | Nozzle 5/8" (15.9 mm) |
| 1 | HPM-S25-N17 | Nozzle 5/8" (15.9 mm), flush |
| 2 | HPM-S25-T06 | Contact tip M6×1 ø0.6 mm |
| 2 | HPM-S25-T08 | Contact tip M6×1 ø0.8 mm |
| 2 | HPM-S25-T09 | Contact tip M6×1 ø0.9 mm |
| 2 | HPM-S25-T10 | Contact tip M6×1 ø1.0 mm |
| 2 | HPM-S25-T12 | Contact tip M6×1 ø1.2 mm |
| 2 | HPM-S25-A12 | Contact tip M6×1 ø1.2 mm, aluminium |
| 3 | HPM-S25-D01 | Gas diffuser |
| 4 | HPM-S25-I01 | Insulating gasket |
| 5 | HPM-S25-K01 | Swan neck 45° |
| 6 | HPM-S25-G01 | Front handle shell |
| 7 | HPM-S25-S01 | Switch base |
| 8 | HPM-S25-F01 | Hook |
| 9 | HPM-S25-R01 | Spring support |
| 10-1 | HPM-S25-J01 | Cable ball joint + support spring, large |
| 10-2 | HPM-S25-G02 | Rear handle (with hole) |
| 10-3 | HPM-E40-P01 | Euro lock nut |
| 10-4 | HPM-M36-E01 | Euro central adapter body + spring pins |
| 10-5 | HPM-S25-E02 | Euro conduit cap |
| 11 | HPM-S25-C01 | Miller control wire and plug |
| 12 | HPM-S25-C02 | Lincoln control wire and plug |
| 13 | HPM-S25-E03 | Tweco central connector |
| 14 | HPM-S25-E04 | Miller central connector |
| 14-1 | HPM-S25-E05 | Wire guide assembly only |
| 15 | HPM-S25-L11 | Liner 0.8–0.9 mm, 4.6 m (15 ft) |
| 15 | HPM-S25-L12 | Liner 0.8–0.9 mm, 7.6 m (25 ft) |
| 15 | HPM-S25-L13 | Liner 1.0–1.2 mm, 4.6 m (15 ft) |
| 15 | HPM-S25-L14 | Liner 1.0–1.2 mm, 7.6 m (25 ft) |
| 15 | HPM-S25-L15 | Liner 1.3–1.6 mm, 4.6 m (15 ft) |
| Part no. | Complete torches | |
|---|---|---|
| HPT-S25-301 | Spray Master 250 torch, 3 m, Euro connector | |
| HPT-S25-302 | Spray Master 250 torch, 3 m, Miller connector | |
| HPT-S25-303 | Spray Master 250 torch, 3 m, Tweco connector | |
| HPT-S25-304 | Spray Master 250 torch, 3 m, Lincoln connector | |
| HPT-S25-401 | Spray Master 250 torch, 4 m, Euro connector | |
| HPT-S25-402 | Spray Master 250 torch, 4 m, Miller connector | |
| HPT-S25-403 | Spray Master 250 torch, 4 m, Tweco connector | |
| HPT-S25-404 | Spray Master 250 torch, 4 m, Lincoln connector | |
| HPT-S25-501 | Spray Master 250 torch, 5 m, Euro connector | |
| HPT-S25-502 | Spray Master 250 torch, 5 m, Miller connector | |
| HPT-S25-503 | Spray Master 250 torch, 5 m, Tweco connector | |
| HPT-S25-504 | Spray Master 250 torch, 5 m, Lincoln connector |
Produktblad som PDF
Ta med dig hela produktbladet
En PDF med bild, alla tekniska data och maskinens QR-kod, i HELIOS egen design och med ett unikt dokument-ID så att du alltid vet vilken version du har i handen.
03 / Nedladdningar
Dokumentation och nedladdningar
04 / Relaterade
